1698 Jones St Suite 1, Brawley, CA 92227
Ph. (760) 554 6713, (619) 886 5971
Baja Voodoo 
Baja Voodoo
USA l 1698 Jones St Suite 1, Brawley, CA 92227
Imperial Valley California
ph: USA: 760 554 6713
info
Synergy Suspension Products
SELECTIONS: Products : Suspension Lift Kits : Synergy Suspension : Synergy Suspension Products
 | SYN3402C Bump Stop Can Mount Our Price: $35.00 Bump Stop Can Mount... |
 | SYN3404 Bump Stop Can Mount Our Price: $35.00 Bump Stop Can Mount... |
 | SYN3405 Synergy 2.0" Air Bump Can, Single Pinch Bolt (DOM) Our Price: $35.00 * Air Bump Mounting Can * Fits Bilstein, Fox, and SAW 2.0 Air Bumps * Available in 1026 DOM * Machined ID to allow for welding the can between frame rails or tube... |
 | SYN3403 Synergy 2.0" Air Bump Can, Tall w/ Single Pinch Bolt (DOM) Our Price: $34.99 * Air Bump Mounting Can * Fits Bilstein, Fox, and SAW 2.0 Air Bumps * Made from 1026 DOM * Designed for applications where our standard bump cans are too short... |
 | SYN3121 Synergy Bump Stop Axle Pad Our Price: $10.00 * Bump Stop Pad, across tube mounting position * Designed specifically for hydraulic air bump stops, can also be used with rubber or polyurethane bump stops * Brackets are laser cut and CNC bent form 1/4" high strength carbon steel * 3 1/2" x 4 1/2" bump stop contact patch * Designed for 3" axle tubes * Sold individually... |
 | SYN3620-07-14-10 Synergy Double Adjuster Tube Adapters - 0.875" -14 Left Hand Thread, 1.000" ID Tube Our Price: $45.00 Synergy Suspension Double Adjuster Tube Adapter * The Synergy Suspension Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems * The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal * The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster... |
 | SYN4024 Synergy Jeep JK 2 Gallon Compressor Mount (Viair) Our Price: $55.00 * Designed for mounting 2 Gallon air compressor tank between the radiator and engine * Powder coat finish for maximum corrosion resistance * Kit contains 2 brackets and all mounting hardware... |
 | SYN5801 Synergy Jeep JK 2/4DR Front Grab Handle Set (2 Handles) Our Price: $65.00 * Synergy Suspension Jeep JK, TJ, LJ, YJ Grab Handles * Manufactured from high quality 1.0" X .083" DOM tubing * Powder coat finish eliminates corrosion that can occur under extreme element * Includes all hardware necessary for a quick and easy installation * Compatible with both hard and soft tops Includes: * (2) Handles * (2) J-Hook Mounts (Front only) ... |
 | SYN8012-03 Synergy Jeep JK Dana 30/35/44 Lower Control Arm Skid Our Price: $35.00 * Jeep JK Dana 30/35/44 Lower Control Arm Skid Plate * Designed to be welded on the front or rear Jeep JK lower control arm mounts * Brackets are laser cut and CNC bent from 1/4" high strength carbon steel * Heavy duty 3 sided construction provides for a VERY rigid bracket * Sold in pairs... |
 | SYN8012-02 Synergy Jeep JK Front Dana 30/44 Inner C Gusset Kit - 2.5" Axle Our Price: $65.00 * Synergy Suspension Jeep JK Dana 30/44 Inner C Upper & Lower Gusset Kit * Designed to be welded to the front C-Yokes of the Jeep JK Dana 30 or 44 axle * Brackets are laser cut and CNC bent from 1/4" high strength carbon steel * Heavy duty 3 sided construction provides for a VERY rigid bracket * 1 Kit will fit a complete front axle Kit... |
 | SYN8055 Synergy Jeep JK Front Track Bar Bracket Our Price: $125.00 * Compatible with 3.0" and taller lifts * Heavy duty front track bar bracket for the Jeep JK * This bracket raises the vehicles suspension roll center by 3.0" * Special bolt-on design strengthens the factory mount that is prone to failure * Raising the roll center reduces vehicle body roll and dramatically improves overall handling * Laser cut from 3/16" steel & 2... |
 | SYN8002 Synergy Jeep JK Heavy Duty Chromoly Tie Rod Our Price: $325.00 * Heavy duty tie rod for Jeep JK Wranglers * Bent similar to factory bar to clear sway bar mounts * Made from 1 3/8" 4130 Chromoly and Heat Treated for maximum strength - 2x (200%) stronger than stock tie rod * Synergy Suspension Double Adjuster Sleeve: allows adjustment of tie rod length without removing it from the vehicle * Strongest Jeep JK Tie Rod on the... |
 | SYN8009-12-01 Synergy Jeep JK Heavy Duty Front Ball Joint Set (1 Upper, 1 Lower) Our Price: $125.00 # Designed to replace the factory ball joint that is prone to premature failure on lifted Jeep JKs with large off-road tires # Fully greasable sintered metal on bushing design that has high wear resistance # Outperforms the factory ball joint assembly # Ball joint boot is made from tear/wear resistant polyurethane # Includes all necessary hardware for installation # 12 Month Unlimited-Warranty... |
 | SYN8007 Synergy Jeep JK Heavy Duty Steering Stabilizer Relocation Bracket Our Price: $45.00 * Synergy Suspension Jeep JK Fox/Synergy Suspension Steering Stabilizer Relocation Kit * Designed to be used with or without Synergy Suspension Front Track Bar Bracket (PPM-8055 & PPM-8089) * Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK * The kit includes grade 8 hardware and is easily installed using basic hand tools * Manufactured from high strength 3/16"... |
 | SYN8001 Synergy Jeep JK High Steer Drag Link Our Price: $175.00 * Synergy Suspension Jeep JK High Steer Drag Link for 2-Door & 4-Door Jeep JKs * Includes a new tie rod end for the steering knuckle; reuses stock tie rod end on the pitman arm * Fully adjustable without removing tie rod from axle or frame end * Made from 1-3/8" .250 Wall DOM * Suspension components feature an abrasive-resistant powder coat finish for maximum durability and... |
 | SYN4018 Synergy Jeep JK Onboard Air Compressor Bracket (Viair & ARB) Our Price: $50.00 * Jeep JK air compressor bracket. * Easy bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK. * If you have seen under the hoods of a JK you will know that space to mount these compressors are slim. Features: * Designed for 2007 to 2010 Jeep JK Wrangler With stock or Hemi engine * Works with VIAIR... |
 | SYN8003 Synergy Jeep JK Steering Stabilizer Tie Rod Clamp Our Price: $50.00 Synergy Suspension Jeep JK Fox Steering Stabilizer Tie Rod Clamp * CNC machined from 1020 DOM material * Zinc plated from maximum corrosion resistance * Compatible with the Synergy Suspension & Fox monotube steering stabilizers * Designed to mount the factory and aftermarket style steering stabilizers on the factory JK tie rod (1.375" OD) * 100% bolt on components assures an easy, trouble free installation... |
 | SYN8001-02-01 Synergy Jeep JK Tie Rod Flip Adapter Our Price: $9.99 # Adapter is designed to flip the taper on the steering knuckle # Eliminates the need for reaming the knuckle to the correct taper. Drill the existing taper with a 7/8" drill bit for installation # CNC machined from 303 stainless steel # Sold Individually... |
 | SYN5000 Synergy Jeep TJ/LJ Front Coilover Bracket Kit Our Price: $400.00 * Improves Vehicle Driving Characteristics * Increases Articulation * Includes All Necessary Mounting Hardware * Uses 2" Diameter, 12" or 14" Travel Emulsion/Remote Reservoir Shocks * Also can be used with FOX 2.5" Air Shocks * Uses Stock Bump Stops * Compatible With Common On Board Air * Compatible With Common Body and Engine Lifts ... |
 | SYN4003-10 Synergy Line Clamp Kits for -6 Race Hose Our Price: $15.00 Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2" * The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis�, suspension links, or other tubular components * The rubber Line Clamp Kits are designed to fit tightly around 1.5� to 2� tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines. ... |
 | SYN4003-03 Synergy Line Clamp Kits for 3/16" Std Brake Hard Lines Our Price: $15.00 Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2" * The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis�, suspension links, or other tubular components * The rubber Line Clamp Kits are designed to fit tightly around 1.5� to 2� tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines. ... |
 | SYN4003-09 Synergy Line Clamp Kits for 3/8" Automotive Lines Our Price: $15.00 Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2" * The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis�, suspension links, or other tubular components * The rubber Line Clamp Kits are designed to fit tightly around 1.5� to 2� tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines. ... |
 | SYN4003-11 Synergy Line Clamp Kits for 3/8" Hydraulic Hose Our Price: $15.00 Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2" * The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis�, suspension links, or other tubular components * The rubber Line Clamp Kits are designed to fit tightly around 1.5� to 2� tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines. ... |
 | SYN4023-875-625 Synergy Shock Soft Jaws - 0.625" & 0.875" Shafts Our Price: $30.00 These aluminum Synergy Suspension Shock Soft Jaws securely hold the shock shaft and shock body in place in your vice. Fits both 5/8" & 7/8" shafts.... |
 | SYN3102 Synergy Suspension 3" Radius Flat Tab Our Price: $5.00 * 3" radius tab for mounting to axles, 3" tube, etc. * Designed for 9/16" Bolt * Material: hot rolled steel * Thickness: 1/4"... |
 | SYN5003 Synergy Suspension TJ/LJ Rear Coilover Extended Bracket Kit Our Price: $300.00 * Improves Vehicle Driving Characteristics * Increases Articulation * Includes All Necessary Mounting Hardware * Uses 2" Diameter, 12" or 14" Emulsion/Remote Reservoir Shocks * Coil over shocks use a triple rate spring set up * an also be used with FOX 2.5" Air Shocks * Uses Stock Bump Stops * Compatible With Common Body and Engine Lifts ... |
 | SYN4015 Synergy Suspension Universal Shock Spanner Wrench Our Price: $30.00 * Designed for adjusting the spring retaining rings on 2.0" and 2.5" Fox, Sway-A-Way, King and FOA Coil Over Shocks * Integrated pins allow for easy removal of the bearing cap for shaft/piston removal on Fox and King Shocks * All-in-one wrench designed to reduce the amount of tools needed in your shock tuning toolbox * Made from 1/4" 304 Stainless Steel... |
 | SYN3612-14-L Synergy Threaded Weld-On Tube Adapter - 1.500" Tube ID, 1.25-12 Left Hand Thread Our Price: $14.00 * Designed for use with several sizes of rod ends and tie rod ends * CNC machined from alloy steel for easy weld-ability to common DOM material * Available in several different sizes as well as right & left-hand thread... |
 | SYN3612-14-R Synergy Threaded Weld-On Tube Adapter - 1.500" Tube ID, 1.25-12 Right Hand Thread Our Price: $14.00 * Designed for use with several sizes of rod ends and tie rod ends * CNC machined from alloy steel for easy weld-ability to common DOM material * Available in several different sizes as well as right & left-hand thread... |
 | SYN5006-02 Synergy Universal 3-Link Frame Mount (2.625") Bracket Pair Our Price: $235.00 * Universal 3-Link Frame Mount Bracket (Pair) * High clearance lower link mounts are angled out at 10 degrees * Upper link mount allows for a wide selection of mounting points when mounting the upper axle mount * The brackets come with tabs that allow the upper link mount to be mounted on either side of the frame * The brackets are designed to use any joint... |
 | SYN3105 Synergy Universal 3.0" Diameter, Radius Welded Shock Mount Our Price: $25.00 * Weld on shock mount bracket * Designed for any type of shock including coilovers and air shocks * Laser cut and CNC bent from 3/16" carbon steel * Hole size: 1/2" * Mounting width: 1.5" * Sold Individually... |
 | SYN5006-01 Synergy Universal 4-Link Frame Mount (2.625") Bracket Pair Our Price: $265.00 * Universal 4-Link Frame Mount Bracket (Pair) * High clearance lower link mounts are angled out at 10 degrees * Upper link mount features 3 separate pick up points allowing for easy adjustment of the suspension geometry * The brackets upper link mounts are angled at 25 degrees to meet at the top of the axle housing. * The brackets are designed to use any joint with... |
 | SYN3109 Synergy Universal Axle Mount Track Bar Brackets - Crossover Steering Our Price: $50.00 * Universal weld on track bar bracket designed for cross over, hysteer or normal steering alxes. * Bracket can be trimmed to desired height to adjust the mounting position of the track bar to alighn the track bar and drag link in the same plane * 9/16" through hole, 1.6" mounting width to match a PPM-4306 track bar bushing, JM12, JMX12, RSMX12T or KMX12 rod end with 3712-09-160 Heim Spacer ... |
 | SYN3116 Synergy Universal Axle Mount Track Bar Brackets - Standard Steering Our Price: $40.00 Designed for 3 inch axle tube, 5/8 inch bore rod ends, FK HRSMX10 or HJMX10 rod ends.... |
 | SYN3101-00-L Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 0 Degree, Left Side Our Price: $15.00 * Weld on link mount bracket * Designed to be used on an axle housing with a 3" diameter * Link brackets are laser cut and CNC bent from 1/4" carbon steel * Heavy duty 3 sided construction provides for a VERY rigid bracket * Hole size is 9/16"; mounting width is 2 5/8" * The bracket is designed to be used with any... |
 | SYN3101-00-R Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 0 Degree, Right Side Our Price: $15.00 * Weld on link mount bracket * Designed to be used on an axle housing with a 3" diameter * Link brackets are laser cut and CNC bent from 1/4" carbon steel * Heavy duty 3 sided construction provides for a VERY rigid bracket * Hole size is 9/16"; mounting width is 2 5/8" * The bracket is designed to be used with any... |
 | SYN3101-00-R/L Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 0 Degree, Right/Left Side Our Price: $15.00 * Weld on link mount bracket * Designed to be used on an axle housing with a 3" diameter * Link brackets are laser cut and CNC bent from 1/4" carbon steel * Heavy duty 3 sided construction provides for a VERY rigid bracket * Hole size is 9/16"; mounting width is 2 5/8" * The bracket is designed to be used with any... |
 | SYN3101-10-L Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 10 Degree, Left Side Our Price: $15.00 * Weld on link mount bracket * Designed to be used on an axle housing with a 3" diameter * Link brackets are laser cut and CNC bent from 1/4" carbon steel * Heavy duty 3 sided construction provides for a VERY rigid bracket * Hole size is 9/16"; mounting width is 2 5/8" * The bracket is designed to be used with any... |
 | SYN3101-10-R Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 10 Degree, Right Side Our Price: $15.00 * Weld on link mount bracket * Designed to be used on an axle housing with a 3" diameter * Link brackets are laser cut and CNC bent from 1/4" carbon steel * Heavy duty 3 sided construction provides for a VERY rigid bracket * Hole size is 9/16"; mounting width is 2 5/8" * The bracket is designed to be used with any... |
 | SYN3214 Synergy Universal Shock Mounts - Flat Mount, No Radius, 1.50" Mount Width Our Price: $8.00 * 1/2" Hole * 3/16" Hot Rolled Steel * Mounting widths available: 1.25" or 1.50"... |
 | SYN3213-175 Synergy Universal Shock Mounts - Parallel Bolt, 1.75" Radius, 1.50" Mount Width Our Price: $8.00 * Flat Shock Tab * Designed to mount tubing or axle housings etc * 1/2" Hole * 3/16" Hot Rolled Steel * Bolt runs parallel with notch * Mounting widths available: 1.25" or 1.50"... |
 | SYN3416-150 Synergy Universal Steering Column - Cut for 1.50" OD Tube Our Price: $140.00 * Allows for easy adjustment of steering column * Laser cut from 3/16" steel... |
 | SYN4501 Synergy Universal Tire Carrier Hinge, 1.75" Dia Our Price: $135.00 * High grade trailer style spindle 1.25" Dia. or 1.75" Dia. * Timken tapered roller bearings * CNC machined bearing housing with high grade seal & cap * The whole assembly is greaseable for life long performance... |
 | SYN3217 Synergy Universal Track Bar Frame Bracket (Un-welded) Our Price: $40.00 * Un-welded Bracket (4 Pieces) * Accepts 9/16" Bolt * Mounting width: 2-5/8" * Designed to work with Bushing Kit: Part #PPM-4305... |
 | SYN3103 Synergy Universal Upper Control Arm Axle Bracket (2.625") - 3" Tall, Flat Bottom Our Price: $15.00 * Weld on link mount bracket * Designed to be used on Diff Trusses or any flat mounting surface * Strong, heavy duty bracket * Hole size is 9/16"; mounting width is 2 5/8" * 3" from center to top hole to bottom edge; can be trimmed to desired length * The bracket is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildabe spherical bearing assemblies... |
 | SYN4111-5-45-H Synergy Wheel Spacer - 4x4.5, 1.25" Thick - 87-06 YJ/TJ/LJ, 84-01 XJ/MJ, 93-98 ZJ, 02-Up KJ/KK Our Price: $100.00 * Synergy Suspension Wheel Spacers * Wheel hub & lug centric for increased strength * CNC machined from billet 6061-T6 aluminum * Features corrosion resistant red anodizing * High grade wheel studs & lug nuts * Can be used with factory or after market wheels * Includes Loctite * Sold in pairs... |
 | SYN4113-5-50-H Synergy Wheel Spacer - 5x5, 1.75" Thick - 07-Up JK, 06-Up XJ, 99-Up WJ/WK Our Price: $100.00 * Synergy Suspension Wheel Spacers * Wheel hub & lug centric for increased strength * CNC machined from billet 6061-T6 aluminum * Features corrosion resistant red anodizing * High grade wheel studs & lug nuts * Can be used with factory or after market wheels * Includes Loctite * Sold in pairs... |
Baja Voodoo
USA l 1698 Jones St Suite 1, Brawley, CA 92227
Imperial Valley California
ph: USA: 760 554 6713
info