1698 Jones St Suite 1, Brawley, CA 92227
Ph. (760) 554 6713, (619) 886 5971
Baja Voodoo 
Baja Voodoo
USA l 1698 Jones St Suite 1, Brawley, CA 92227
Imperial Valley California
ph: USA: 760 554 6713
info
Teraflex : JK Accessories
SELECTIONS: Products : Suspension Lift Kits : Teraflex : JK Accessories
 | TeraFlex-JK-Axle-Sleeve-Kit the weak axle tubing and knuckles on JK Dana 30 or 44 factory axles. The sleeves are designed to slide inside the factory tubes and provide increased durability and support throughout the axle. This prevents unwanted bending or breaking under extreme conditions. The knuckle gussets fit the profile of the upper portion of the kn uckles and works to strengthen them in the weakest areas. Tested in the demanding terrain... |
 | TER1953100 dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle. These spacers are designed to work in stock configuration, or with a lifted vehicle. depending on your needs. The rear spacer also incorporates our industry exclusive spring retainer and guide that helps to realign the spring to its proper location... |
 | TER4637300 product. 6063-T5 aluminum, making them extremely strong and light weight at the same time. They are over 1/4 in key strength areas to provide structure and strength. They are easy to install with few modifications to your vehicle (some drilling required). Rubber beading is included to prevent any scuffing between the sliders... |
 | TER4637310 this product. 6063-T5 aluminum, making them extremely strong and light weight at the same time. They are over 1/4 in key strength areas to provide structure and strength. They are easy to install with few modifications to your vehicle (some drilling required). Rubber beading is included to prevent any scuffing between the sliders... |
 | TER1954105 spacer dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle. These spacers are designed to work in stock configuration, or with a lifted vehicle. depending on your needs. The rear spacer also incorporates our industry exclusive spring retainer and guide that helps to realign the spring to its proper location... |
 | TER1953075 dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle. These spacers are designed to work in stock configuration, or with a lifted vehicle. depending on your needs. The rear spacer also incorporates our industry exclusive spring retainer and guide that helps to realign the spring to its proper location... |
 | TER1954100 dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle. These spacers are designed to work in stock configuration, or with a lifted vehicle. depending on your needs. The rear spacer also incorporates our industry exclusive spring retainer and guide that helps to realign the spring to its proper location... |
 | TER1953200 dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle. These spacers are designed to work in stock configuration, or with a lifted vehicle. depending on your needs. The rear spacer also incorporates our industry exclusive spring retainer and guide that helps to realign the spring to its proper location... |
 | TER1954200 dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle. These spacers are designed to work in stock configuration, or with a lifted vehicle. depending on your needs. The rear spacer also incorporates our industry exclusive spring retainer and guide that helps to realign the spring to its proper location... |
 | TER4671111 control the front suspension compression so your large tires wont damage your fenders. Made from polyurethane with a steel integrated support to handle those hard impacts. Sold as single units. Fits 2007+ Wrangler and Unlimited JKs |
 | TER4997100 bracket mounts to the JK tailgate, utilizing the factory mounting locations for the spare tire mount and can Wranglers including Rubicon and Unlimited.... |
 | TER953800 control the front suspension compression so your large tires wont damage your fenders. Made from polyurethane with a steel integrated support to handle those hard impacts. Sold as single units. Fits 2007+ Wrangler and Unlimited JKs |
 | TER1954600 control the rear suspension compression so your large tires wont damage your fenders. Made from polyurethane with a steel integrated support to handle those hard impacts. Fits 2007+ Wrangler and Unlimited JKs. |
 | TER1954700 control the rear suspension compression so your large tires wont damage your fenders. Made from polyurethane with a steel integrated support to handle those hard impacts. Fits 2007+ Wrangler and Unlimited JKs. |
 | TER954802 control the rear suspension compression so your large tires wont damage your fenders. Made from polyurethane with a steel integrated support to handle those hard impacts. Sold as single units. Fits 2007+ Wrangler and Unlimited JKs with a 4"+ lift |
 | TER1553800 of JK factory front shocks and extend them 2.5. They are included in the TeraFlex JK Wrangler 2.5 Budget Boost with Adapters, but are sold separately here as a pair. Note: Washers are included.... |
 | TER1554800 length of your rear shock absorbers. If you have the Rubicon package your shocks are a high end quality shock and a good choice for a spacer lift or even the 2-1/2 Spring Lift. Each kit has Left and Right Adapter Extensions and all the hardware to install them. Fits 2007 and newer Wrangler and Unlimited models.... |
 | TER1055000 product. for those desiring to retain their stock wheels, but have additional offset to run larger tires. and come with wheel sutds pressed in. Additional lug nuts are included. Sold in Pairs.... |
 | TER1055010 product. for those desiring to retain their stock wheels, but have additional offset to run larger tires. 5x4.5 or 5x5.5 bolt pattern wheel. and come with wheel sutds pressed in. Additional... |
 | TER1753010 product. Spherical polyurethane bushings eliminate noise and avoid metal-to-metal wear and tear. You can secure the disconnects and swaybar safely out of the way when disconnected. Fits all JK Wrangler models.... |
 | TER1756000 product. Spherical polyurethane bushings eliminate noise and avoid metal-to-metal wear and tear. You can secure the disconnects and swaybar safely out of the way when disconnected. Fits all JK Wrangler models.... |
 | TER1954202 including spring & budget boost type lifts. The trackbar bracket helps to restore the trackbar to a natural position to keep the rear axle correctly centered under the vehicle with no binding or interference with other components. No drilling required.... |
 | TER1954777 2-4 by using the adjustable mounting locations. The bracket mounts to the rear axle, and is designed to be the strongest mount on the market. This is accomplished by anchoring the bracket in several locations to properly distribute the force of the trackbar. to reduce rear body roll tendencies by restoring the proper roll center of the vehicle.... |
 | TER1951200 All wear items are included- bushings, chrome ball, flat retaining washer, and retaining snap ring. tool kit #4000016.... |
 | TER4253100 the OEM Rzeppa CV flange with a standard CV cardan joint style yoke and U-bolt style connector. The conversion is not only stronger but makes u-joint changes easier after breakages.... |
 | TER4254100 the OEM Rzeppa CV flange with a standard CV cardan joint style yoke and U-bolt style connector. The conversion is not only stronger but makes u-joint changes easier after breakages.... |
 | TER4240300 product. the OEM Rzeppa CV flange with a standard CV cardan joint style yoke and U-bolt style connector. The conversion is not only stronger but makes u-joint changes easier after breakages.... |
 | TER4949100 OEM Rzeppa CV flange with a standard CV cardan joint style yoke and U-bolt style connector. The conversion is not only stronger but makes u-joint changes easier after breakages.... |
 | TER2266900 product. for the 231 transfer case. This shifter will allow the 241OR case to have one more low range position for true 2WD Low Range to allow for tighter turning, easier front steering, and will help to eliminate any unnecessary drivetrain binding. The kit is completely internal and... |
 | TER3990630 extreme protection from rocks, obstacles and other debris on the trail. They are more than 3/8 thick. Fits all Dana 30 housings- standard & high pinion.... |
 | TER3990650 offer extreme protection from rocks, obstacles and other debris on the trail. The cover is cast from the same high-strength ductile-iron as our HD axle housings. The cover is over 3/8 thick to ensure protection. It also offers two fill plugs for use in standard or high pinion D44 housings, or when the pinion must be rotated in extreme applications. Fits all Dana 44 housings- standard & high pinion, TeraCRD50R housings.... |
 | TER3990660 Dana 60 this product. designed to offer extreme protection from rocks, obstacles and other debris on the trail. The cover is cast from the same high-strength ductile-iron as our HD axle housings. The cover is over 3/8 thick to ensure protection. It also offers two fill plugs for use in standard or high pinion D44 housings,... |
 | TER3990007 product. applications that will be installed in JK vehicles. The heavy duty bracketry is CNC cut from 1/4 steel, and precision bent. The HD lower control arm & shock mount also features a skid plate to prevent shock damage and keep you from hanging up on obstacles. The... |
 | TER4304400 relocate the rear brake lines allowing more rear axle movement without stressing the brake lines. Designed to fit 2007- current Wrangler and Unlimited models including Rubicon.... |
 | TER4934200 product. bracket kit that allows JK Unlimited owners the ability to add a 3rd row seat for additional seating. This innovative seat bracket kit allows the use of a JK 2 door rear bench seat, and retains the ability to keep the fold-and-tumble functionality. The seat can also be... |
 | TER4997210 JK owners face when adding an aftermarket bumper, larger spare tire, spare tire carrier, and CB antenna. increments to complement tires up to 38. An integrated CB antenna mount eliminates the need for additional bracketry. The extension bracket bolts to the factory spare tire mounting holes on the tailgate, and uses the factory wiring and light. |
 | TER1907200 necessary to extend the mounting point of the wheel from the vehicle. This simple bracket allows you to accomplish that task. It is a simple bolt-on kit. this bracket may allow you to mount a tire that is too large to be supported by the factory bracket. If too |
 | TER4653100 product. Wrangler is designed to offer ultimate rock protection, and match the refined design styling of the vehicles body. With state-of-the-art CAD software, extensive engineering has been used to provide a look that flows with the JK and still offers the protection needed to allow the 4500+ lb. vehicle to... |
 | TER4654100 Teraflex JK RockGuard Outback rear bumper Our Price: $875.89 (Selected options may carry additional charges) Use coupon code SAVE10 at checkout and save 10% on this product. Coupon can be used for online or phone orders. The TeraFlex RockGuard Outback rear bumper for the JK Wrangler is designed to offer ultimate rock protection, and continue to match the design styling of the vehicles body. With state-of-the-art CAD software, extensive engineering has been utilized to provide a look that flows with the JK and still offers the protection needed to allow the 4500+ lb. vehicle... |
 | TER4634400 this product. RockGuard Outback rear bumper for the JK Wrangler.... |
 | TER4802100 shackles. The zinc plated shackles provide an attachment for connecting looped ends of straps and snatch blocks. |
 | TER4638420 on this product. mounted directly to the JK RockGuard Explor front bumper. The reinforced mount is designed to accept most winches including the newer accessory winches (Warn PowerPlant). Shackle D-ring mounts also come in the winch accessory mount kit for added recovery convenience. The winch... |
 | TER4634200 rear crossmember, and includes all necessary hardware. Perfect for any receiver accessory (bike racks, safari racks, etc.) that fit a 2 receiver hitch. Wire harness not included but is compatible with the 4-Pin harness 82210213 and the 7-Pin harness 82210214AB from the Jeep manufacturer.... |
Baja Voodoo
USA l 1698 Jones St Suite 1, Brawley, CA 92227
Imperial Valley California
ph: USA: 760 554 6713
info